6th Street Bridge

Heading west on the Iconic 6th street bridge......

 

 another great shot by the talented DUTCHMAN Maurice....

Speedhunters online magazine

A cool bit by cool Brit dude- Ben Chandler for the guys over at Speedhunters with great Photos by Larry chen.

www.speedhunters.com/2012/12/magnus-walker/

Was cool spending time with these guys....

classic porsche magazine article

i finally have made it to the cover of the september issue of

CLASSIC PORSCHE Issue # 13.

its a great article with great pictures of my 65 built 66- sunroof 911.

many thanks to 

stephan szantai for the great pictures & words &

keith Seume for his continued support .

 

now go out & buy a copy & get a subscription...

its a GREAT MAGAZINE

 

enjoy..

INNER COVER.

 

FULL STORY..

 

 THERE IS NOTHING LIKE HOLDING THE ACTUAL COPY IN YOUR HANDS,,,,,,

so go BUY 1 !!!

 

cheers

 

magnus

DRILLED DOOR HANDLES

DRILLED DOOR HANDLES...

 

for my 72 STR 002 i have decided to retro fit early SWB 

Handles that i have drilled & had re -chrome plated...

they are one of the many unique touches to the car.

 

 

 

here is my step by step process 

 

a few basic tools are needed...

 

any door handle will work ,i decided to go with the 65-67 swb handle as i like the slender profile .

plus its just a bit unusual on a LWB car.

i removed the key lock cylinder prior to the following steps

 

1-i made a templete with a 1 " spaceing

 

 2- i set the door handle in a press & made my piolt punch holes

 

 3- with my holes made, I marked them for clear visabilty.

 

4- i then mounted the door handle in a jig on my drill press

& secured my 1/4 drill bit.

 here the jig becomes helpful in centering the door handle,

which  is not parrel in shape & has a slight curve.

 

with a little oil i am ready to drill.

REMEMBER TO MAKE SURE YOU ARE IN THE CORRECT POTION FIRST &WEAR GOGGLES !

5- AFTER I HAVE DRILLED ALL 5 HOLES I AM READY

FOR THE COUNTER SINK BIT.

This bit is the most difficult due to the curve of the door handle.

i feel it gives the handle a "finished look & feel" & is worth the extra effort.

 

 

TOOLS FROM THE JOB.

I DID AN EXTRA SET FOR MY 67 S -R INSPIRED CAR,

WHILST I WAS AT THE DRILL PRESS....

 

A FEW ART SHOTS FROM THE DRILL PRESS

6- THE NEXT STEP IS TO SEND OUT FOR CHROME PLATING...

 

  it is always good to get shinny chrome bits back from the plater...

next i will re install the key lock cylinder...

 

 

7-add rubber gasket & test fit in the car.....

 

 a small cost to pay for a COOL unique detail ,,,

1 of the many small pieces that i add to my builds that hopefully make  A good car GREAT :)

 

 all told it took & some  time,Effort  &  a little money.

the finished door handle was well worth the work.

the sense of achievement IS PRICELSS...

 

 

go ahead & try it for your self,,,,

every time you open the car door ........

you will be glad you did it..

 THE ABOVE DOOR HANDLE IS NOT YET FINISHED.

I STILL NEED TO INSTALL THE KEY LOCK CYLINDER

it just looked too good not to do a test fit...

 

 

 CHEERS

magnus

68-911 SPORTS PURPOSE

68 911 SPORTS PURPOSE

 

A BLAST FROM THE PAST.

MORE PICTURES HERE ,,,,

http://magnuswalker911.blogspot.com/p/68-911.html